Bat exclusions are set to begin next week and we are all set to go. I get asked all the time so I wanted to give our customers and potential customers a quick overview of exactly how we do bat exclusions.
First and foremost we do not kill bats. The entire process is centered around excluding them from the structure. Our rule of thumb is if a pinkie finger can fit into the gap so can a bat and it must be sealed. Our process goes like this:
1. We perform a complete roof top inspection, including all fireplace frames, shutters, gutters, vents etc.
2. After we have identified entrance areas we place a one way door over the gap that will allow the bats access out, but not back in. (One way doors are 3’x3′ netting secured to the home on
3 1/2 sides. This netting is NOT permanent)
3. We then seal all the remaining gaps with black expanding foam at the exterior perimeter so the bats do not re-locate to another area. (the foam is invisible from the ground if done correctly)
4. The one way doors are left up for about 7-10 so that we are sure all the bats are gone.
5. We return after the 7-10 days have expired to remove one way doors and seal the gaps that are left.
The procedure takes about 6-10 man hours to complete depending on the size of the home.
If you are in need of our services or have further questions, we can be reached at 1-888-879-6481.